How I Actually Configured Okki Go in Our AI Agent (and the Domain-Burning Mistake I Made First)
2026-09-28 · Julian Hartwell
-
The Slack message that started it
-
Phase 1: Comparing vendors and asking the wrong questions
-
Phase 2: How to configure okki go in an AI agent
-
The turn: a bounce-rate spike that almost cost us our domain
-
Phase 3: What "B2B contact" actually means in an agent-native workflow
-
What I'd expected to matter, and what actually did
-
What I'd tell the next person
The Slack message that started it
January 2025. Our VP of Sales sent me a message that was short enough to be uncomfortable: "We need an AI SDR. Figure it out, you're running point."
For context — I'm the office administrator at a 35-person B2B SaaS company. I handle software and vendor ordering across roughly 14 vendors, about $180,000 annually. I report to both operations and finance. Buying sales tools isn't my specialty, but bringing outside vendors in and making them work is. That part, I know.
What he wanted was an agent-native prospecting workflow for our six SDRs. Something that would handle the parts every SDR hates — list building, enrichment, verification, and first-touch prep. He'd heard about it on a podcast. Of course he had.
So I ran a procurement process. Sideways, as it turns out.
Phase 1: Comparing vendors and asking the wrong questions
My first instinct was pure admin-buyer: build a comparison matrix. Features, seat cost, reviews, contract length. I evaluated four vendors, including okki go, a data provider, and two email-sequencing tools.
I asked the questions I always ask:
- How much per month, per seat?
- Annual discount?
- What's included at that price?
It took me about three weeks to realize I was asking this wrong. You cannot compare AI prospecting tools on unit price. Two tools that look identical in a demo behave completely differently once they're inside your agent workflow. It's tempting to think you can just line up unit prices and pick the middle one. But identical spec sheets from different vendors can produce wildly different outcomes once the data hits your sending infrastructure. The "always get three quotes" advice ignores what it actually costs you to evaluate, onboard, and unwind a vendor that doesn't work.
Six weeks of demos, security questionnaires, reference calls. By early March we chose okki go. The deciding factor was the agent-native prospecting model — the workflow is designed for an agent to run, rather than forcing an agent into a UI built for humans to click through.
Contract signed. On me.
Phase 2: How to configure okki go in an AI agent
Then the real work started.
I assumed it would be like setting up any new SaaS account: a few toggles, import a CSV, done. It isn't. Configuring okki go in an AI agent meant rethinking how information moves through the whole pipeline. What I eventually understood was that the okki go outreach preparation workflow runs in three stages, and the order between them matters more than any individual setting inside them:
- Contact discovery and enrichment. B2B contacts come in from multiple sources and get enriched through a waterfall — multiple providers stacked so coverage is higher than any single source can give you.
- Verification. Every record gets validated before the agent touches it.
- Outreach preparation. Segmentation, prioritization, personalization, then a human-in-the-loop approval step.
I skipped step two.
Which was, in hindsight, catastrophically dumb. But it seemed fine at the time.
The turn: a bounce-rate spike that almost cost us our domain
Our agent went live on March 19. By March 22, our SDRs were reporting bounce rates around 37% — no, 41%, I'd have to pull the dashboard to be exact, but the point is it was four times what we'd modelled for. Not dozens of bounces. Hundreds.
We were burning our sending domain. Slowly, then all at once.
That's when I went deep on email verification accuracy, in a way I should have done three weeks earlier:
- Not every email validation service does the same thing. Some do syntax and MX checks only. Others do the full SMTP handshake.
- Accuracy claims (the "99% accuracy" slides) are almost always measured against the fraction of addresses a service can actually resolve. Coverage on the hard cases — catch-all domains, role accounts, recently recycled inboxes — is what actually matters.
- Verification has to run inside the outreach prep workflow, not as a one-time gate. People change jobs. Companies change domains. Inboxes get abandoned. Re-verify on a cadence. (Note to self: build a quarterly re-verification job. I keep forgetting.)
I'm not a deliverability specialist — I can't speak to the technical side of sender authentication or reputation management beyond what our email admin told me. What I can tell you from a procurement angle is this: evaluate an email validation service by coverage, not by accuracy percentage. Take a sample of 500 addresses, mix in some you know are dead, run it, and see what it catches. Run it twice. If a vendor won't let you test, that's your answer.
Once we rebuilt the pipeline properly, bounce rate dropped below 2%. Same list. Same agent. The only difference was verification.
Phase 3: What "B2B contact" actually means in an agent-native workflow
Something else I got wrong, and figured out later than I should have.
I'd been thinking of our purchase as an "outreach tool." What we actually bought was a data layer plus an orchestration layer. A B2B contact isn't a static row in a spreadsheet — it's a record that should update with signals: hiring activity, funding rounds, job changes, intent data. That's a very different mental model.
Until we wired B2B contact records into the agent-native prospecting workflow properly — so records refresh on intent signals and the agent re-ranks them — our reply rate was sitting around 4%. Not a disaster, not a success either.
After two rebuilds in April, we stabilized at 9–11% reply rate. Not miraculous, but for our category it's healthy. More importantly, it's now predictable.
What I'd expected to matter, and what actually did
Before March, I assumed the value of this kind of tool lived in the writing layer. Everything I'd read about AI SDRs talked about human-sounding messages, tone-matching, personalization. In practice, the biggest gains came from the boring layer underneath: verification and enrichment. Copy is a fourth-order problem. Verification is first. Enrichment is second.
The second surprise: human-in-the-loop didn't slow us down the way I feared. It sped us up, because errors got caught before send instead of after.
What I'd tell the next person
If you're the one tasked with buying and standing up an agent-native prospecting workflow, here's what I'd insist on:
- Build verification first. Before the agent touches anything.
- Test email validation services on coverage, not accuracy claims. Look for catch-all handling, real-time checks, re-verification support.
- Get enrichment right before personalization. A great message to the wrong person loses to a mediocre message to the right one.
- Don't remove the approval step. You'll thank yourself later.
- Ask vendors what they don't do. The vendor who said "this isn't our strength — here's who does it better" earned my trust for everything else.
Per FTC advertising guidelines (ftc.gov/business-guidance/advertising-marketing), vendors are required to substantiate the claims they make in demos and marketing materials. But don't wait for them to hand that evidence over. Ask for it. Test it yourself. That lesson cost us a domain reputation and about three weeks of cleanup.
This isn't my area of expertise — I don't run outbound, I don't write the sequences. But I do know how to buy a tool, wire it into a workflow, and clean up when it goes sideways. That turned out to be enough.